188bet滚球专家_188188188188bet_188bet有目共赌

这两天元旦放假,才给车加满油,准备出去走走,但刚开出不远,就闻到气油味,正要去修理厂,车引擎盖就冒烟了!据了解,车燃烧持续了二十多分钟,消防队员到来后,迅速将火扑灭,并有交警指挥拖车将其拖走。根据易观千帆发布的数据来看,每日瑜伽的用户多为女性,已经占到了95.66%,而男性用户仅占了4.32%,男女用户比例严重失调,且用户年龄主要分布在24以下,占到了45%。不过,由于灵长类动物研究已经受到严格监管,他相信克隆技术不会被滥用,总体上他持“谨慎乐观”态度。目前,中国采用互联网和手机新技术的速度已远远超过一些发达国家。民警当即想让他带路去。
Contact
VICTORY TECHNOLOGY
HL: 86-769-8507 7000

Fx: 86-769-8531 3421

Monica: 86-13829137016 

Sophia: 86-13925827222 
Attn.: Ms Monica 

 monicachao@xinkeju.com 

Add: Dalang Town,Dongguan City,GD.CN.


Tin Solder Product Making Equipment

Hydraulic solder bar Stamping machine

1. Technical parameters:


2.Description:
     The hydraulic extruder coder is supporting the use of equipment and can extruder out tin tin automatic measurement of length, precise control of the weight of tin, can automatically cut off while printing on the tin Manufacturers trademarks and tin components of the machine, to overcome the traditional tin casting weight of each is difficult to ensure consistent, tin poor quality, likely to contain impurities, surface defects such as easily oxidized to produce high quality tin of products, but also safer production. The machine is mainly suitable for the required size of the triangle and trapezoid and rectangular tin (either select one specification).
     It mainly consists of frame, guide, play yards cutting device, the length measuring device, tin conveying device, receiving, hydraulic system and electric control parts and other components.
     Tin came out from the extruder into the hydraulic tin coders, tin adjusted first positioned along the guide groove straight forward, followed by length measurement, by the limit switch control, when tin the tip reaches the switch control point signal, a code on the device two cylinders cut down the pressure, respectively, in tin tin stamped on trademarks and ingredients, while cutting off the fuel tank under the tool to push, the tin cut or chop with tin in the tool bar contact, tools, stamps, tin together to move forward, to prevent every pause play yards off the tin when bending deformation of the phenomenon, when tin was cut off, the length of the cylinder release on the metering device and reset, tin fell conveyor, conveyor brought the tin rewinding units in the closing stage of the tin material can be packed.
     Scope: For a lead-free solder bar cutting dozen yards.
3.Features:
     1. High production efficiency: capable of continuous automatic coding cut to achieve a mechatronics.
     2. Tin of good quality: smooth surface, no oxidation, no holes, end formation, the same length.
     3. Easy to operate, can greatly reduce the labor intensity, safe and reliable.
     4. Machine is compact and easy maintenance.
     5. Using double coding design, respectively, in the same tin tin marked trademarks and ingredients.
     6. Hydraulic coding mode, powerful, large-sized tin can meet production requirements.
     7. Using flat knife cut way design, tin ports smooth without marks.