Tin wire drawing machine work instruction

Print】 【Close】 【Views:】 【 Addtime:2013/8/20】
Solder wire drawing machine in the production step by step according to the process operation, follow the wi to do each step.
1, work with must be to specifications and types of tin line;
2, operation tin wire and solder wire for welding machine, tin line shall be checked before welding have broken the bad quality of rosin;
3, in joint with spray paint mark color, after color stem node in wire drawing;
4, according to the drawing order, touch the table wearing the diamond die, die good drawing tin wire again;
5, after waiting for connector pull out machine cut before and after the joint 0.5 meters, check for broken ends of rosin anomaly at the same time;
6, Timely marks on the tin line according to the specifications clearly marked, and barrels pack labeled card mounted in line on the edge of the obvious.
【Prev】Solder extrusion machine operation process
【Next】How to choose a suitable for paper tube polishing machine