188bet滚球专家_188188188188bet_188bet有目共赌

但人才也相对集中。所有大事小情,他都要做到周到仔细,不能出半点纰漏。前些年,王民乡二岔马村的六个村民小组自愿整体搬迁,三个汉族小组都搬走了,三个回族村民小组基本都选择留在本地,这样的观念对孩子也会产生较大影响。虽然有点累,但黄光健仍然觉得现在的工作有奔头。
Contact
VICTORY TECHNOLOGY
HL: 86-769-8507 7000

Fx: 86-769-8531 3421

Monica: 86-13829137016 

Sophia: 86-13925827222 
Attn.: Ms Monica 

 monicachao@xinkeju.com 

Add: Dalang Town,Dongguan City,GD.CN.


Tin Solder Product Making Equipment

Pneumatic solder bar stamping machine

1. Technical parameters:


2.Equipment Description:
       The tin coder is supporting the use of extruder equipment has obtained the national patent office issued a patent certificate, may extruder out of tin tin automatic measurement of length, precise control of the weight of tin , can automatically cut off while printing on the tin manufacturer trademark of the machine, to overcome the traditional tin casting weight of each is difficult to ensure consistent, tin poor quality, likely to contain impurities, surface defects such as easily oxidized, thus produce high quality tin products, but also safer production.
       The machine consists of frame, straight positioning device, drive, play yards and length cutting device detection device and a discharge device component.
Tin came out from the extruder into the tin coders, tin adjusted first positioned along the guide groove straight forward, followed by length measurement, by the limit switch control, when tin the tip reaches the switch control points after the signal, play yards compete cutting device moves have been marked on the tin, and the tin of cutting tool, the tool or seal when in contact with the tin, tool, seals, tin and guide device with a forward mobile, prevent each pause play yards off the tin when bending deformation phenomenon that has been cut by the tin tin discharging device to launch.
       Scope: For a lead-free solder bar cutting dozen yards.
  3. Features:
      1 high production efficiency: capable of continuous automatic coding cut to achieve a mechatronics.
      2 tin of good quality: smooth surface, no oxidation, no holes, end formation, the same length.
      3 simple operation, can greatly reduce the labor intensity, safe and reliable.
      4 The machine is compact and easy maintenance.
      5 using pneumatic control, clean environment